SACC-DSIV-MS-5CON-L180 SCO THR

Extract from the online catalog   SACC-DSIV-MS-5CON-L180 SCO THR   Order No.: 1551752 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551752   Sensor/actuator flush-type connector, 5-pos., M12 SPEEDCON, Acoded, rear/screw mounting with M12 thread, with straight THR solder connection   Product notes WEEE/RoHS-compliant since: 04/13/2007 Commercial data EAN 4046356162043 Pack 60 pcs. Customs tariff 85366990 Weight/Piece 0.010176 KG Catalog page information Page 32 (PC-2009) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data General data Nominal current IN 4A Nominal voltage UN 60 V Number of positions 5 Volume resistance ≤ 3 mΩ PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.com Page 1 / 5 Jul 6, 2009 SACC-DSIV-MS-5CON-L180 SCO THR Order No.: 1551752 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551752 Insulation resistance ≥ 100 MΩ Ambient temperature (operation) -25 °C ... 85 °C (Connector) General characteristics Coding A - standard Inflammability class acc. to UL 94 V0 Surge voltage category II Pollution degree 3 Degree of protection IP67 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, (nickel-plated) Sealing material FKM / EPDM Type of connection THR solder connection Status display No Drawings Drilling diagram PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.com Page 2 / 5 Jul 6, 2009 SACC-DSIV-MS-5CON-L180 SCO THR Order No.: 1551752 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551752 Dimensioned drawing THR tray packaging M12 flush-type plug Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 1 Housing cut-out for two-part M12 flush-type connectors with THR and wave soldering connection, version 2 Housing cutout for M12 fastening thread, mounting panel with feed-through hole (alternative with surface as protection against rotation) PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.com Page 3 / 5 Jul 6, 2009 SACC-DSIV-MS-5CON-L180 SCO THR Order No.: 1551752 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551752 Schematic diagram Pin assignment M12 male connector, 5-pos., A-coded, male side PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.com Page 4 / 5 Jul 6, 2009 SACC-DSIV-MS-5CON-L180 SCO THR Order No.: 1551752 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1551752 Address PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 00 Fax +49 5235 3 41200 http://www.phoenixcontact.com © 2009 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.com Page 5 / 5 Jul 6, 2009